Description
The Rialto 400 has an array of digital and analog inputs, including PCM to connect with digital audio outputs from televisions and a 12V trigger for use with control and automation systems. Toslink, coaxial, line level RCA, 1/8″ audio and speaker level inputs for interfacing with source units without line level are included in the specification. This plethora of inputs eliminates the need for additional expensive outboard components thus making it the most flexible product of its kind.
In order to keep these inputs systemized, the Rialto 400 utilizes AudioControl’s SMART Signal Sensing, which allows the user to prioritize which input to use based on personal preference. When the system is turned on, it is configured to automatically search for the preferred active signal and decipher the appropriate processor needed in communication with one of the system’s digital or analog inputs. For example, if a homeowner decides to switch from using a separate distributed audio system within the home to his or her integrated Sonos® Connect set-up, the Rialto 400 will instantly recognize the change and immediately switch to using the connected digital audio input used by the Sonos®.
The Rialto 400 also features an integrated headphone jack to allow it to be used in other applications such as gaming systems or with personal audio products such as headphones and iDevices.
Features
240 watts per channel RMS output into 2 ohms
Bridged power of 410 watts
Custom Speaker Optimization Controls
Ultra low current consumption of <1 watt at standby!
Dual speaker output terminals for each channel (optional 5-way binding posts)
Main plus Auxiliary inputs with Signal-Sense Turn-On
Stereo/Mono control
Cool Blue front panel status LED indicators
Signal Present LED’s on speaker outputs
PFM Subsonic filter for speaker protection
AudioControl LightDrive Protection circuitrySignal Sensing Inputs
Rack Mountable Front Panel (Non-Rack Mount option available)
Inputs
Inputs: 1 Stereo Main, 1 Stereo Aux
Input Maximum: 8V
Input Impedance: 15kΩ
Outputs
Amplifier Channels: 2 (4 terminal blocks), optional 5-way binding posts
Power Output (8Ω): 60W per channel
Power Output (4Ω): 120W per channel
Power Output (2Ω): 240W per channel
Power Output (Bridged Mono): 410W
Minimum Speaker Load: 2Ω
Performance
Damping Factor: >200
Total Harmonic Distortion: <0.9%
Signal to Noise: >105dB, A-wtd ref Full Output
Crosstalk: >80dB @ 1kHz
Equalizer Frequencies: 45Hz, 150Hz, 300Hz, 700Hz, 2.5kHz, 12kHz
Control
Remote Power Trigger: +12 VDC
General
Power Consumption (Standby): <1W
Power Consumption (Idle): 8W
Power Consumption (loud listening level): 30W
Power Consumption (maximum): 550W
BTU/Hour Heat Dissipation (Idle): 25
BTU/Hour Heat Dissipation (loud listening level): 200
BTU/Hour Heat Dissipation (maximum): 490
Protection: clipping, short circuit, thermal, ultrasonic, DC offset, stable into reactive or mismatched loads
Weights & Dimensions
Dimensions: 17”W x 12”D x 3.5”H (2U)
Weight: 19.0lbs (8.62kg)
in the box: Architect Model 210 EQ, Power Cord, Manual, Warranty
Reviews
There are no reviews yet.